用户登录

作废 BS 4521-3.1-1974 专用铁路道岔规范.第3部分:英国铁路机车不运行的、轴负荷不超过25吨的中型道岔.第1节:工字钢轨道岔Specification for railway turnouts for private users - Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons - Turnouts using bull head rail

作废 BS 4500B-1970 ISO极限与配合.数据表:选用的ISO配合－基轴制ISO limits and fits - Data sheet: selected ISO fits - shaft basis

作废 BS 4479-5-1990 层覆物品的设计.阳极氧化覆层的推荐方法Design of articles that are to be coated - Recommendations for anodic oxidation coatings

作废 BS 4427-12-1979 工业用三磷酸钠(三磷酸五钠)和焦磷酸钠(焦磷酸四钠)的试验方法.工业(包括食品)用缩聚磷酸盐.砷含量的测定.二乙基二硫代氨基甲酸银光度测定法Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Condensed phosphates for industrial use (including foodstuffs) - Determination of arsenic content - Silver di

作废 BS 4361-20-1990 木工机械.第20部分:具有移动工作台的单锯片圆锯床规范Woodworking machines - Specification for single blade circular sawing machines with travelling table

作废 BS 4316-1968 红细胞压积测量器具规范Specification for apparatus for measurement of packed red cell volume

作废 BS 4267-5-1987 硝酸铵.第5部分:水不溶物的测定方法Ammonium nitrate - Method for determination of matter insoluble in water

作废 BS 4257-1967 电信和有关电子设备用铁磁氧化物制E形磁芯尺寸规范Specification for the dimensions of E-cores made of ferromagnetic oxides for use in telecommunication and allied electronic equipment.

作废 BS 4220-1-1974 农用轮式拖拉机座位的试验方法.第1部分:人工道路试验Methods of test for seats on agricultural wheeled tractors - Tests on artificial track

作废 BS 4172-1-1999 手持式消灭家庭飞虫气压瓶.杀虫性能规范Hand-held pressurized aerosol dispensers against houseflies - Specification for insecticidal performance

作废 BS 4154-1-1985 热固性聚酯树脂半透明塑料波纹板(玻璃纤维增强的).第1部分:材料和性能要求规范Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced) - Specification for material and performance requirements

作废 BS 4140-16-1986 氧化铝的试验方法.第16部分:用火焰原子吸收法测定锌含量Methods of test for aluminium oxide - Determination of zinc content by flame atomic absorption

作废 BS 4088-3-1995 地板清洗产品.喷雾清洗机用液态配方规范Carpet cleaning products - Specification for spray extraction machine formulations used in liquid form

作废 BS 4086-1966 受热家用设备的最大表面温度推荐标准Recommendations for maximum surface temperatures of heated domestic equipment

作废 BS 4040-2001 机动车辆用加铅汽油规范Specification for leaded petrol (gasoline) for motor vehicles

作废 BS 3L 86-1971 铝-铜(2.5)-镁(0.3)合金冷锻铆钉用实心钢丝规范(直径不超过10mm)Specification for wire for solid, cold-forged rivets of aluminium-copper-magnesium alloy (not exceeding 10 mm diameter) (Cu 2.5, Mg 0.3)

作废 BS 3A 212-1993 55/65 tonf/in＜UP2＞镀隔钢螺栓(六角形、3A统一螺纹和紧公差柄)Specification for cadmium-plated steel bolts, 55/65 tonf/inUP2 (Unified hexagons, 3A Unified threads and close tolerance shanks)

作废 BS 3900-E12.2-2000 涂料的试验方法.用凹槽深度测量法测定努普硬度Methods of test for paints - Determination of Knoop hardness by measurement of the indentation depth

作废 BS 3892-3-1997 粉状燃灰.第3部分:粘结薄泥浆使用的粉状燃灰的规范Pulverized-fuel ash - Specification for pulverized-fuel ash for use in cementitious grouts

作废 BS 3831-1964 家用器具和餐具搪瓷精加工规范Specification for vitreous enamel finishes for domestic and catering appliances